|
Charge, Clean and
Recover Up To Ten Batteries At One Time If you sell, stock or service
lead-acid batteries, you need the RediPulse Pro-10 Charge/Maintenance
System. The Pro-10 keeps new batteries “factory-fresh” while they rest on
the shelf waiting to be installed or sold. Batteries that sit idle suffer
from damaging sulfation buildup (lead-sulfate deposits on the battery
plates). This buildup is the main cause of battery problems and failure.
The Pro-10 uses our scientifically-proven ReNew-IT Pulse Technology® to
keep these deposits off the plates. It safely provides a continuous
charge/ maintenance on each battery which keeps them working on a chemical
level. Using the Pro-10 keeps your batteries clean, charged and ready to
go at any time. Plus, by removing these energy-dampening deposits, your
batteries are stronger than ever so you won’t have to rotate them as
often. This means your “shelf-life” warranty issues and other
battery-related expenses are reduced dramatically. Prevent Damaging
Sulfation Buildup The Pro-10 keeps batteries in like-new condition by
preventing damaging lead-sulfate deposits from forming on the battery
plates. This sulfation buildup is the main cause of battery problems and
failure -- especially on batteries that sit unused for extended periods.
Sulfation buildup occurs as lead sulfates form on the battery plates
during the normal charge/discharge cycles. During this process, some of
the sulfates enlarge to the point where they won't accept energy so they
stay on the plate. Over time these sulfates can build up until battery
efficiency is reduced and the battery finally dies. The Pro-10 uses our
unique, scientifically-proven ReNew-IT Pulse Technology® to prevent this
buildup. It emits a pulsating dc current into the battery that removes the
sulfate deposits from the plates through the use of a Ion Transfer
process. As the deposits leave the plates they are converted back to
active electrolyte. Recover Sulfated Batteries By removing the
energy-dampening sulfate deposits, you can actually recover older sulfated
batteries that can no longer accept a charge (as long as they have a
charge level of at least 11 volts). “Renewing” dead batteries will help
reduce battery costs. It will also help protect the environment. Since
batteries last longer, there is less danger of batteries being prematurely
discarded in landfills and other sensitive areas. By "cleaning" the plates
the Pro-10 keeps batteries in peak condition so they can provide maximum
performance and power all the time. Having clean plates also helps extend
battery service life up to three times longer (results may vary).
RediPulse Pro-10 Specifications Circuit Box Dimensions 14.21" X 4.88" X
2.01" No. of Battery Stations 10 Clip Wire Length 6 feet AC Adapter (110V)
110V AC, 60 Hz Adapter Wire Length 6 feet Benefits • Keeps up to ten
12-volt lead-acid batteries in "factory-fresh" condition while they rest
on the shelf waiting to be installed or sold. • Reduces “shelf-life”
warranty issues and other battery-related expenses are dramatically
reduced • Works with all conventional flooded lead-acid batteries and
sealed “maintenance-free” batteries, including Valve Regulated Lead-Acid
(VRLA), Absorbed Glass Mat (AGM) and gel cell. • Safe and reliable •
Two-year limited warranty.
Price: $ 429.00 |
