Universal Portable Radio Battery Chargers
*********
Universal Charger
|
|
||||
|
|
Universal Charger 1 Data Sheet
Plug the W&W wall power source into a 110 VAC or 120 VAC wall outlet*. Plug the 2.1 mm plug into the UC1. Only use supplied power source! Place the battery to be charged into the charging pocket with the contacts of the battery facing the contacts of the charger. If the battery voltage is too low, the L.E.D. will illuminate ORANGE until the charger brings the battery to the correct voltage level. It will then turn RED to indicate that the charger has switched into the Rapid Charge state. The L.E.D. will turn GREEN when the battery is ready for use and is in the trickle charge state. At this point the battery may be warm to the touch but this is normal. This process should take approximately 1/2 hour to 2-1/2 hours depending on the mAh size of your battery.
After the battery has been fully charged and removed from the charger, wait 15 seconds before charging another battery. If the battery is NiCd or NIMH and new, it may be necessary to charge and use it two or three times before full capacity is realized. This is not the case with Lithium based batteries.
This unit uses the "Snap-In" instantly changeable battery cups. If you have one battery type or 50, the Universal Charger series can handle it. Truly a unit that will never go obsolete. Multi-Bay & Multi-Chemistry. What more could you ask for? USA Made.
Model, UC1
$79.00
for 3.6 Volt to 14.4 volt NiCD, NIMH or 3.7 volt to 14.8 volt Li-Ion
Supplied Power supply will depend on your battery voltage
Six Bay Version
UC6
$599.00
Master Charger
MC1CE Exerciser/ Conditioner Unit
Conditions NiCD Batteries to Eliminate "Memory Effect"
Automatically Charge/Discharge Packs to Cycle Batteries
$89.00
Universal Charger
 | Will Charge Virtually All 3.6, 4.8. 6, 7.2, 9.6 or 10 Volt Li-Ion, NIMH NiCD or Lead Acid Battery Packs. Important Note! Two versions are available. Model BCR3312V for NiCD & NIMH & Model BCR336 for Li-Ion. Same Price. |
|
When Charging NiCD Packs, the Model BCR336 will operate as a Charger/Conditioner to help avoid developing memory in your battery. |
|
The charger will operate from a standard household AC outlet or on the road from a 12 volt cigarette lighter adapter. It is a complete, convenient system to charge and condition your rechargeable batteries. |
|
Optional Pigtails for external packs, Lead Acid, model cars etc. Ask for "Leads" to be supplied. There is no extra charge for this option |
$69.00
Specify NiCD/NIMH or Li-Ion
Panasonic "Multi-Charger" Battery Double Charger
|
For Panasonic Video Batteries. Charges two at a time! |
$59.00
Kenwood Rapid Charger for the TK2140/3140
|
For the New Model 2140/3140 Conventional or Trunking Portable Radio |
| New Item, Multi Chemistry |
$89.00
Streamlight Gang Chargers for the Model SL-20
Master Charger 5 = $475.00
Master Charger 10 = $750.00
Unit Pricing
UC1, Universal Charger 1 Bay----------------------------------$79.00
UC6, Universal Charger 6 Bay---------------------------------$599.00
MasterCharger IIa Overnight (While Supplies Last)-----$49.00
Master Charger 1CE Exerciser/Conditioner----------------$89.00
Kenwood 2140/3140 Li-Ion Charger Model "MC-1L"----$89.00
Additional Cups For All Chargers--------------------------------$30.00
Car Adapter Cord For Older MasterCharger 1a, 1a+1a--$20.00
Universal Charger Model BCR3312V for NiCD & NIMH---$69.00
Universal Charger Model BCR336 for Li-Ion Batteries----$69.00
Panasonic Multi-Charger---------------------------------------------$59.00
Streamlight Gang Charger SL-20 (5) Unit Charger-----------$475.00
Streamlight Gang Charger SL-20 (10) Unit Charger---------$750.00
Swap 120 VAC for 220 VAC European type Power Pack = Add $10.00 (Ask for Availability)
|
Warranty on Chargers and Cups: 1 year with original receipt. |
|
No warranty on Car Adapter Cord. |
|
Cups for the Universal Charger series are not interchangeable with the older Master Chargers. |
|
Cups can be interchanged between MasterCharger 1a and MasterCharger IIa. When ordering additional cups, specify if you have a MasterCharger 1a or IIa. |
|
All Prices and specifications are Subject to Change Without Notice. |
|
We offer Cups for most of the packs we sell. This includes Hand Scanners |
Universal Charger 6
Now, You Can Charge 6 Different Batteries Simultaneously!
Plug the W&W wall power source into a 110 VAC or 120 VAC wall outlet*. Plug the 2.1 mm plug into the UC1. Only use supplied power source! Place the battery to be charged into the charging pocket with the contacts of the battery facing the contacts of the charger. If the battery voltage is too low, the L.E.D. will illuminate ORANGE until the charger brings the battery to the correct voltage level. It will then turn RED to indicate that the charger has switched into the Rapid Charge state. The L.E.D. will turn GREEN when the battery is ready for use and is in the trickle charge state. At this point the battery may be warm to the touch but this is normal. This process should take approximately 1/2 hour to 2-1/2 hours depending on the mAh size of your battery.
After the battery has been fully charged and removed from the charger, wait 15 seconds before charging another battery. If the battery is NiCd or NIMH and new, it may be necessary to charge and use it two or three times before full capacity is realized. This is not the case with Lithium based batteries.
This unit uses the "Snap-In" instantly changeable battery cups. If you have one battery type or 50, the Universal Charger series can handle it. Truly a unit that will never go obsolete. Multi-Bay & Multi-Chemistry. What more could you ask for? USA Made.
Unit Price = $599.00
Unit is supplied with a Heavy Duty Switching Power Supply 110-230 VAC
Warranty: One Year
6 Cups Included in price, you specify which ones.
E-mail: Sales
Fax This Order Form For Immediate Processing Of Your Order
Contact Info:
Sandown Wireless
P.O. Box 564
East Hampstead, NH 03826
Toll Free: 866-379-8437
Office: 603-974-0725
Fax: 603-887-2117
